Description:
The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.
It is also used as a DC power source to cover the requirements as per the standards IEC/EN 61000-4-17 (Ripple on DC) and IEC/EN 61000-4-29 for voltage dips and interruptions on DC supplies.
The NetWave series is well suited for testing inverters (e.g. solar power, wind power) and e-vehicles like LV 123 standard. Additionally, the NetWave series (3-phase) offers the necessary capabilities for avionics testing as per DO-160, Airbus ABD0100 and Boeing as well as per MIL-STD-704 and is perfectly suited as reference source for Harmonics and Flicker testing.
Optionally the NetWave 3-phase series can be equipped with a power-recovery module to absorb fed-back power (AC/DC) up to nominal power of the NetWave.
Highlights:
> Wide Power Bandwidth: DC - 5 kHz
> Output Power up to 270 kVA AC / 324 kW DC
> Output up to 3*690 VAC (p-p), +/-1120 VDC
> High Inrush Current Capability
> Power-recovery up to nominal power (optional)
Benefits:
● THE POWERFUL MULTITALENT FOR AC AND DC SUPPLY SIMULATION
● The programmable 3-phase AC/DC power sources with their wide frequency bandwidth offer powerful waveform generation capabilities for various test applications in the EMC area and for avionics testing. Based on a Dual-Processor technology, with an integrated high-performance PC, a digital signal processor (DSP) and equipped with a hard disk, the NetWave Series is capable to generate and record waveforms in realtime.
● According to standard requirements a pure sinusoidal voltage is needed for harmonics and flicker measurements. The output voltage of the NetWave Series is therefore guaranteed to have a very low distortion (THD) of less than 0.1% regardless of the load. No matter whether waveforms are programmed of segments or of single points (normally resulting in MBs of data) the NetWave masters it all.
● Interfaces like GPIB and Ethernet are common features with the NetWave Series.
Specification:
3-PHASE NETWAVE-MODELS | |
NetWave | 3-phaseMultifunctionAC/DCsource |
NetWave 20.x | 22,5 kVA AC / 27 kW DC support with wheels |
NetWave 30.x | 30 kVA AC / 36 kW DC, support with wheels |
NetWave 67.x | 67 kVA AC / 72 kW DC, support with wheels optional |
NetWave 90.x | 90 kVA AC / 110 kW DC, stationary placement |
NetWave 108.x | 108 kVA AC / 150 kW DC, stationary placement |