Your Current Position: Products
Search
FPG-SP Ultra-Fast Pulsers
The rise time of FPG-SP series pulse generator ranges from 20 picoseconds to 100 picoseconds. FPG-SP series pulse generator is designed for the convenience of laboratory or industrial use. These pulse generators can be desktop or rack mounted.
High PRF Pulsers
FPG-HF high pulse repetition rate pulsers with PRF from 100 kHz to several megahertz. FPG-HF pulsers are manufactured in both desktop or rack mount housings and are convenient for laboratory or industrial use.
Multi-channel pulsers
In certain cases a high voltage nanosecond or picosecond pulse should be applied to a sustained load or simultaneously to several loads.FPG-X multichannel pulsers are designed for these applications.
Spike Generator Model 7054-2
The Model 7054-2 was especially designed for screen room use in applying high voltage transients at power line inputs to electronic equipment. The adjustable amplitude makes it possible to determine the threshold of susceptibility to spikes appearing on the power line. The Model 7054-2 may be used for performing tests per Method CS06 of MIL-STD-462, Method 5006.1 of MIL-STD-826A, various missile specifications and others.
Transient Generators Model 9354-1
The Model 9354-1 and 9354-2 Transient Generators were especially designed for the performance of a variety of pulse susceptibility tests on subsystems and/or equipment, in accordance with MIL-STD-461E/F/G, Method CS116; also capable of limited testing for RTCA DO-160D, Section 22.
Netwave Series Multi functional AC/DC Power Sources
The NetWave Series (3-phase) are three-phase AC/DC power source, specifically designed to fully meet the requirements as per the standards IEC/EN 61000-4-13, -4-14, -4-28 and in addition to pre compliance testing to -4-27.
Surge Generator
The generator PG1275E is specially designed for conducted susceptibility / transient tests to voltage surge and spikes of 28 Vdc electric circuits in military vehicles according to MIL-STD 1275E.
CS106 Pulse Generator
This generator is designed for the test of the transients conducted susceptibility of power leads according to MIL-STD-461F / CS106. These requirements are applicable to submarine and surface ship equipment and subsystem AC and DC input power leads. This pulse generator must be ordered with the active inductive coupler IC10M.
CS115 Rectangular Pulse Generator
This test generator is designed to comply with the requirements of the MIL-STD-461 CS115. The test method CS115 is used to verify the ability of the EUT to withstand pulse excitation on interconnecting cables. The pulse generator can be ordered with all the accessories in order to build the full test set-up basically consisting of an injection probe, an attenuator and an oscilloscope. The generator can be controlled by a computer through a RS232 or USB interface.
CS116 Damped Sinusoidal Generator
This test generator is designed to comply with the requirements of the MIL-STD 461 CS116. The test method CS116 is used to verify the ability of the EUT to withstand sinusoidal excitation on interconnecting cables. The pulse generator can be ordered with all the accessories in order to build the full test set-up, consisting basically of an injection probe, an attenuator and an oscilloscope.
Digital Control Attenuators
APPLICATIONS:
● Automatic Gain Control
● Communications Systems
● Leveling Circuits
● Precision Test Equipment
● Electronic Simulator
Features：
● Frequency Range: DC-20GHz
● Available in binary 4 to 8 bits configuration With 0.5dB resolution and up to 64dB total attenuation
● Precision, reliability and repeatability
● Automatic Gain Control
● Communications Systems
● Leveling Circuits
● Precision Test Equipment
● Electronic Simulator
Features：
● Frequency Range: DC-20GHz
● Available in binary 4 to 8 bits configuration With 0.5dB resolution and up to 64dB total attenuation
● Precision, reliability and repeatability
Variable Attenuators (Waveguide & Coaxial)
CSA Series variable (level) setting attenuators can have variable IL that range from 0 to 25 dB with full waveguide operational bandwidth. The variable (level) setting attenuators are equipped with a micrometer, which enables rapid re-setting.
Follow Us | Company |
|
咨询电话
010-8840 8841
Copyright©2020 Aero-Rad Technology Co.,Ltd. All rights reserved